A4P-S83

INP_8893

Notes of Dimensions

product_inner02_

※모바일에서는 좌우로 드래그 하셔서 내용을 확인하실 수 있습니다.

A4P-S83
1. Outer dia. of the stator 83
2. Inner dia. of the stator 50
3. Laminated length of the stator 60~120
Front/Rear F R
4. Height of the end-winding Ld 18 22
Hd 20 25
5. Outer dia. of the rotor 49.5
6. Inner dia. of the rotor/max. CU 24/33
AL -
7. Width of the-ring 4

A4P-S83

※모바일에서는 좌우로 드래그 하셔서 내용을 확인하실 수 있습니다.

CU/LD V033krpm

100Hz

 V066krpm

200Hz

 V099krpm

300Hz

 V1212krpm

400Hz

 V1515krpm

500Hz

 V1818krpm

600Hz

 V2121krpm

700Hz

 V2424krpm

800Hz

 V2727krpm

900Hz

 V3030krpm

1000Hz

 V3333krpm

1200Hz

 V3636krpm

1200Hz

 V3939krpm

1300Hz

 Speed
L60 (60mm) 0.4 1.0 1.5 2.1 2.6 3.2 3.7 4.2 4.6 5.2 5.5 5.8 6.2 Power[kW]
L70 (70mm) 0.5 1.2 1.9 2.5 3.2 3.8 4.4 4.9 5.6 5.9 6.4 6.9 7.4
L80 (80mm) 0.6 1.3 2.1 2.8 3.6 4.3 5.0 5.7 6.3 6.9 7.5 8.3 8.8
L90 (90mm) 0.6 1.5 2.4 3.2 4.1 4.8 5.7 6.4 7.1 7.7 8.6 9.3 10.2
L100 (100mm) 0.7 1.9 2.7 3.7 4.5 5.5 6.2 7.1 7.8 8.7 9.5 10.6 11.1
L110 (110mm) 0.8 1.9 2.9 4.0 5.0 5.9 6.9 7.8 8.8 9.6 10.8 11.6 12.2
L120 (120mm) 0.8 2.0 3.2 4.4 5.5 6.5 7.5 8.7 9.6 10.9 11.7 12.4 13.5
Laminated
length 		Power [kW]

※모바일에서는 좌우로 드래그 하셔서 내용을 확인하실 수 있습니다.

CU/HD V033krpm

100Hz

 V066krpm

200Hz

 V099krpm

300Hz

 V1212krpm

400Hz

 V1515krpm

500Hz

 V1818krpm

600Hz

 V2121krpm

700Hz

 V2424krpm

800Hz

 V2727krpm

900Hz

 V3030krpm

1000Hz

 V3333krpm

1200Hz

 V3636krpm

1200Hz

 V3939krpm

1300Hz

 Speed
L60 (60mm) 0.5 1.2 1.9 2.5 3.2 3.8 4.5 5.2 5.7 6.4 6.9 7.4 8.0 Power[kW]
L70 (70mm) 0.5 1.4 2.2 3.0 3.8 4.5 5.3 6.0 6.8 7.4 8.2 8.8 9.6
L80 (80mm) 0.6 1.6 2.5 3.4 4.4 5.3 6.2 6.9 7.7 8.5 9.7 10.2 11.0
L90 (90mm) 0.7 1.8 2.9 3.9 5.0 5.8 6.9 7.8 8.6 9.4 10.5 11.4 12.7
L100 (100mm) 0.8 2.1 3.2 4.4 5.5 6.7 7.5 8.7 9.5 10.6 11.6 13.0 14.0
L110 (110mm) 0.9 2.2 3.6 4.9 6.0 7.3 8.5 9.5 10.6 11.7 13.2 14.4 15.4
L120 (120mm) 0.9 2.4 3.9 5.3 6.6 7.9 9.3 10.6 11.7 13.2 14.6 15.7 16.9
Laminated
length 		Power [kW]

Model NumberA□P-S□□ L□□ V□□ – △△/○○

  • AInduction motors
  • □PNumber of poles
  • S□□Outer diameter of the stator
  • L□□Laminated length
  • V□□Rated speed
  • △△CU or AL (materials of rotor sconductors)
  • ○○LD(Insulation varnish) or HD(Resin Impregnation)
  • CUThe bars and end-rings in the rotor are made from copper to ensure high motor efficiency. This also allows for decreased vibrations from rotation as the shaft is thicker than those used in aluminum rotors.
  • ALThe bars and end-rings in the rotor are made from aluminum which provides an excellent balance between price and performance.
  • LDThis stator is dipped into the insulation vanish. It is our most common model which is suitable to general spindle motors.
  • HDThis copper coil of the stator is filled with special resin which helps to decrease the temperature of coils.